Construction safety tips are for every
individual who walks through a site that includes you, despite your role in the
project.
While skilled workers go through extensive
training on the best practices for the equipment they use; superintendents, visitors,
and other tradesmen should know basic safety measures.
Apart from this, if you are in search of a
reputed supplier who can offer you good quality scaffolds, then you can contact
them accordingly and can avail their products and services.
A well established scaffolding material
supplier will offer you services that are very genuine and cost effective. They
provide services i.e. scaffolding material on hire.
Top 10 Construction Safety Tips are
mentioned as follows:
1. Use the proper tool for the designated task:
Frequent use of inadequate or poorly
designed equipment may eventually lead to health hazards (tendonitis, trigger
finger, white finger, and carpal tunnel syndrome).
Never carry/yank a tool by its cord or
hose. Also make sure to keep these cords or hoses far from sharp edges, oil,
heat, and water.
Protect your ears and eyes from intense
noises and vibrations. You can choose power tools with longer trigger tools, lower
vibrations, and muffled noises.
2. Scaffolding should be erected on a solid surface, and must
itself be solid, rigid, and have a high weight capacity:
Never support scaffolds or planks on uneven
surfaces with portable or unsteady objects.
Stay at least ten feet away from power lines.
A qualified supervisor will manage the erecting and dismantling of the
scaffold. Never overload a scaffold.
3. You should inspect a ladder or stairs before stepping upon
it:
Avoid stepping on anything that is loose,
worn, weak, or otherwise defected or damaged. Choose aerial lifts or elevated
platforms, which are safer options than balancing on a ladder.
You can install guardrails with control
line systems, toeboards, and warning lines. Do not use metal ladders on windy
or stormy days.
4. Never enter an unprotected or unsupported trench:
At least one person remains outside the
trench at all times to warn of changing soil conditions or any other determined
hazards.
Safe exits with ladders, staircases, or
ramps should be positioned regularly along the trench. Obstacles should never
block the exit.
A support system should always be used for
excavations beneath the footing of a foundation or a wall, or any excavations
deeper than twenty feet.
5. Be especially careful while boarding and descending from
heavy equipment:
Especially observe the placement of your
hands and feet, to make sure that they do not get caught or you do not slip.
Never balance or keep yourself in place by
a toe-hold or finger-hold grip. You can safely engage your entire foot or hand
in the process. Do not carry objects while climbing.
6. Preventing a chemical disaster:
In the scenario of a chemical spill within
the workplace, first consider the situation and determine if it is a low- or
high-hazard spill.
Report it immediately if it is high-hazard.
Only allow qualified professionals to deal with the situation. It is safest to believe
that all spills are high-hazard.
Do your best to keep others away and
prevent the spill from spreading.
7. Always wear appropriate clothing and shoes respective to your
job:
Wear safety harnesses if you are working
from an elevated location and there is the risk of falling. Wear a breathing
mask at all times, especially if:
·
You deal with dangerous or
toxic chemicals or fumes.
·
Your workspace has poor
ventilation.
·
Your workspace has flying
particles, debris, or dust.
·
Always wear protective
equipment which is intended and recommended for your particular task.
8. Ensure your electrical tools are used with a G.F.C.I.
grounded power supply:
It is essential for all electric power
tools. It is especially important while working outdoors or in wet conditions.
You can equip temporary lights with non-conductive
guards. Always remember to unplug unused appliances.
9. Keep your wrists and arms in neutral so that you can stay
away from severe symptoms of carpal tunnel syndrome:
Choose a small and handy tool belt that you
can easily keep balanced with small adjustments. Sit (instead of squatting or
kneeling) while working at lower levels, to avoid straining your lower body.
You can use your knees instead of your
back. In this way, you can avoid twisting your body while picking, carrying, or
releasing a heavy load.
Only work on surfaces which are sturdy, clean,
and dry. If you need to cross a slippery surface, take small steps, and put
your whole foot down and toes pointed outwards.
10. Safety is a team effort:
Educate everyone in the workplace regarding
the safety requirements and consider posting a list of workplace safety tips.
Workplace safety training will help them to
reduce or eliminate injuries and illnesses occurring in the workplace.
You have to keep the communication lines
open with your employers, employees and co-workers. It is done in order to
promote and maintain a safe environment.
Conclusion:
1.
Always follow the correct
procedures.
2.
Be alert to hazards that could
affect anyone
3.
Lift slowly and smoothly.
4.
Use machinery only if you are trained,
alert and authorized.
5.
Come up with a fire emergency
plan
6.
Always wear appropriate
clothing and shoes
About Author:
Baba Jagta Shuttering is a well renowned supplier
and manufacturer of scaffolds. We offer services i.e. scaffolding material on hire. Our services are highly reliable and
genuine.
We put our heart and soul to provide our
customers the best service every time. Your requirements are our main concern. We
are highly pleased and delighted to serve you with our ideal services.